View 2SA1843_4145257.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
SILICON POWER TRANSISTOR
2SA1843
PNP SILICON EPITAXIAL POWER TRANSISTOR FOR HIGH-SPEED SWITCHING
The 2SA1843 is a power transistor developed for high-speed switching and features a high hFE at low VCE(sat). This transistor is ideal for use as a driver in DC/DC converters and actuators. In addition, this transistor features a package that can be auto-mounted in radial taping specifications, thus contributing to mounting cost reduction.
FEATURES
* Auto-mounting possible in radial taping specifications * Resin-molded insulation type package with power rating of 1.8 W in stand-alone conditions * High hFE and low VCE(sat): VCE(sat) -0.3 V @IC = -3.0 A, IB = -0.15 A hFE 100 @VCE = -2.0 V, IC = -1.0 A * Fast switching speed
ABSOLUTE MAXIMUM RATINGS (Ta = 25C)
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Collector current (DC) Collector current (pulse) Base current (DC) Total power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC(DC) IC(pulse) IB(DC) PT Tj Tstg Ta = 25C PW 300 s, duty cycle 2% Conditions Ratings -100 -60 -7.0 -5.0 -10 -2.5 1.8 150 -55 to +150 Unit V V V A A A W C C
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D15591EJ2V0DS00 (2nd edition) Date Published April 2002 N CP(K) Printed in Japan
(c)
1998 2002
2SA1843
ELECTRICAL CHARACTERISTICS (Ta = 25C)
Parameter Collector cutoff current Collector cutoff current Symbol ICBO ICER Conditions VCB = -60 V, IE = 0 VCE = -60 V, REB = 50 Ta = 125C VCE = -60 V, VBE(off) = 1.5 V VCE = -60 V, VBE(off) = 1.5 V Ta = 125C VEB = -5.0 V, IC = 0 VCE = -2.0 V, IC = -0.5 A VCE = -2.0 V, IC = -1.0 A VCE = -2.0 V, IC = -3.0 A IC = -3.0 A, IB = -0.15 A IC = -4.0 A, IB = -0.2 A IC = -3.0 A, IB = -0.15 A IC = -4.0 A, IB = -0.2 A VCE = -10 V, IC = -0.5 A VCB = -10 V, IE = 0, f = 1 MHz IC = -3.0 A IB1 = -IB2 = -0.15 A RL = 17 , VCC = -50 V 80 130 0.15 1.0 0.1 100 100 60 -0.3 -0.5 -1.2 -1.5 400 MIN. TYP. MAX. -10 -1.0 -10 -1.0 -10 Unit
A
mA
Collector cutoff current Collector cutoff current
ICEX1 ICEX2
A
mA
Emitter cutoff current DC current gain DC current gain DC current gain Collector saturation voltage Collector saturation voltage Base saturation voltage Base saturation voltage Gain bandwidth product Collector capacitance Turn-on time Storage time Fall time
IEBO hFE1* hFE2* hFE3* VCE(sat)1* VCE(sat)2* VBE(sat)1* VBE(sat)2* fT Cob ton tstg tf
A
- - - V V V V MHz pF
s s s
* Pulse test PW 350 s, duty cycle 2%
hFE CLASSIFICATION
Marking hFE M 100 to 200 L 150 to 300 K 200 to 400
PACKAGE DRAWING (UNIT: mm)
TAPING SPECIFICATION
(OHFWURGH &RQQHFWLRQ %DVH &ROOHFWRU (PLWWHU
2
Data Sheet D15591EJ2V0DS
2SA1843
TYPICAL CHARACTERISTICS (Ta = 25C)
7RWDO 3RZHU 'LVVLSDWLRQ 37 :
$PELHQW 7HPSHUDWXUH 7D &
,& 'HUDWLQJ G7
$PELHQW 7HPSHUDWXUH 7D &
7UDQVLHQW 7KHUPDO 5HVLVWDQFH UWKMDW &:
&ROOHFWRU &XUUHQW ,& $
6LQJOH SXOVH
6LQJOH SXOVH
&ROOHFWRU WR (PLWWHU 9ROWDJH 9&( 9
3XOVH :LGWK 3: V
3XOVH WHVW
&ROOHFWRU &XUUHQW ,& $
'& &XUUHQW *DLQ K)(
&ROOHFWRU WR (PLWWHU 9ROWDJH 9&( 9
&ROOHFWRU &XUUHQW ,& $
Data Sheet D15591EJ2V0DS
3
4
7XUQ2Q 7LPH WRQ V 6WRUDJH7LPH WVWJ V )DOO 7LPH WI V *DLQ %DQGZLGWK 3URGXFW I7 0+]
3XOVH WHVW
&ROOHFWRU 6DWXUDWLRQ 9ROWDJH 9&(VDW 9
&ROOHFWRU &XUUHQW ,& $
&ROOHFWRU &XUUHQW ,& $
&ROOHFWRU &XUUHQW ,& $ &ROOHFWRU &DSDFLWDQFH &RE S)
Data Sheet D15591EJ2V0DS
%DVH 6DWXUDWLRQ 9ROWDJH 9%(VDW 9
&ROOHFWRU &XUUHQW ,& $
&ROOHFWRU WR %DVH 9ROWDJH 9&% 9
3XOVH WHVW
2SA1843
2SA1843
SWITCHING TIME (ton, tstg, tf) TEST CIRCUIT
%DVH FXUUHQW ZDYHIRUP
&ROOHFWRU FXUUHQW ZDYHIRUP
Data Sheet D15591EJ2V0DS
5
2SA1843
* The information in this document is current as of July, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4

▲Up To Search▲

Price & Availability of 2SA1843

	To Download 2SA1843 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .